Tappan GEF351FSA, Инструкция по использованию и уходу

Страница: 10 / 20

10 10
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar
with the various pad functions of the oven as described below.
BROIL PAD — Used to
select the variable broil
function.
UP and DOWN ARROW PADS — Used along with
the function pads to select oven temperature, time of
day, clean time and minute timer.
BAKE PAD —Used
to select the bake
function.
SELF-CLEAN PAD
—
Used to select the Self-
Cleaning cycle. A 2 or
3 hour Self-Clean time
may be selected.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The “OVEN” light will glow each time the
oven turns on to maintain the set oven temperature. The “PREHEAT” light will glow when the
oven is first set to operate, or if the desired temperature is reset higher than the actual oven
temperature. The “DOOR LOCKED” light will flash when the oven door locks and unlocks or
when using the Self-Clean cycle or the oven door lockout is activated.
FEATURE
INDICATOR
LIGHTS — These light
to show which feature
is in use.
CLOCK PAD — Used to
set the time of day.
CLEAR/OFF PAD —
Used to clear any
function previously
entered except the
time of day and minute
timer. Press CLEAR/
OFF to stop cooking.
Also the CLEAR/OFF
pad is used to activate
oven door lockout
setting.
TIMER ON/OFF
PAD — Used to set
or cancel the minute
timer. The minute timer
does not start or stop
cooking. Also,
TIMER ON/OFF
pad is used to set
the Continuous Bake
feature.
Temperature conversion
The electronic oven control is set to operate in °F
(Fahrenheit) when shipped from the factory. The oven can
be programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
To change the temperature to °C (Celsius) or from
°C to °F (control should not be in a Bake or Clean
mode):
1. Press . “— —” appears in the display.
2. Press and hold the until “HI” appears in the display.
3. Press and hold until °F or °C appears in the display.
4. Press the or to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
OVEN CONTROL FUNCTIONS
*Note: The OVEN indicator light on the electronic display
will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is
cycling to maintain the selected baking temperature. When
the preheat indicator light turns OFF, your oven is ready.
NOTE
The time of day must first be set in order to operate
the oven.
NOTE
To Set the Clock
When the range is first plugged in, or when the power
supply to the range has been interrupted, the display will
flash “12:00”.
1. Press once (do not hold pad down).
2. Within 5 seconds, press and hold the or until
the correct time of day appears in the display.
Note: The clock cannot be changed during any timed
bake or Self-Clean cycle.
SETTING OVEN CONTROLS