FAST-18T Radar Speed Display Trailer user Manual
13
NO DISPLAY TOGGLE (9987)
This allows the user to toggle the no display menu option. Displays the scrolling text “NO DISPLAY”. Then the
user chooses between options ‘OF’ and ‘ON’ using a button input. Turning this on will completely hide the
display when the sign is in VA or NM mode.
OFFSET MODE TOGGLE (9993)
This allows the user to toggle the offset mode option. Displays the scrolling text “OFFSET MODE”. Then the user
chooses between options ‘OF’ and ‘ON’ using a button input. Turning offset on will give you the option to set
an offset value in the violator alert settings, this value will be added to all your VA thresholds when the option
relay is activated.
HIGH-LOW VA TOGGLE (9995)
This allows the user to toggle between the high and low max speed options (low=max of 99mph, high=max
of 199mph). Displays the scrolling text “VIOLATOR MAX”. Then the user chooses between options ‘LO’ and ‘HI’
using a button input.
SERIAL NUMBER (8008)
Display the 6-digit serial code by showing digits 3 and 2 for 3 seconds, digits 1 and 0 for 3 seconds, and the
2-digit sign/trailer designation (48 or 52) for 3 seconds
TURNING THE SET TIME AVAILABILITY ON AND OFF
This feature simply leaves the Set Time mode in or out of the main menu. “On” means the Set Time Availability
was off and will now be turned on. “Off” means the Set time Availability was on and will now be turned off. We
recommend the Set Time Availability be “Off” for most applications.
4.
SETTING THE CLOCK AND TIMED EVENTS
Note:
Unless the sign is to be powered on and off automatically at certain times, it is not necessary to set the
clock
The internal timer is a 24 clock used to turn off the display’s system to extend battery life or to prevent
disturbing residents at late or early hours. This feature will not take into account weekends, holiday or daylight
savings time. The Set Time function must first be “turned on” in-order to set the On/Off times. See
“Advanced
Features”
, code 9989 to activate this function.
Once the feature is activated, you will see the following codes added to the startup display setting:
Timer Code Chart
ST
=>
“Set Time”
Time Set Menu
EN
=>
“Enable”
Turn on the timer feature
DS
=>
“Disable”
Turn off the timer feature
OH
=>
“On Hour”
Hour at which sign is to turn on
OM
=>
“On Minute”
Minute at which sign is to turn on
FH
=>
“Off Hour”
Hour at which sign is to turn off
FM
=>
“Off Minute”
Minute at which sign is to turn off
HR
=>
“Hour”
Set current time hour (24 hour)
MN
=>
“Minutes”
Set current time minute
