The Settings Menu allows you to:
1.
Set Distance
- Set the distance at which the radar is picking up vehicles.
The distance units automatically align with the speed units being used by
the radar (e.g. miles if MPH and kilometers is KPH).
2.
Your File Name
- This is helpful if you decide to move the trailer to a
different location on the same day. Each file can list, for example, the street
name so when you are ready to run the reports, you can easily identify
each location. If you have multiple trailers/signs, each unit can have a
unique name or number.
a.
Make Your File Name
- The file name is (8) characters long and can be
any combination of letters, numbers, and spaces. The default file name
is in “MMDDYY.RU2” format. If the first file is not deleted and the card is
used again
on the same date
, the next file will read “MMDDYY-1.RU2”.
It will automatically rename the files up to “MMDDYY-9.RU2”. When 10
such automatically renamed files are already present, you will get an
error message.
To input a new file name, press the “Enter” key at the
Your File Name
screen. Use the + and – keys to select the characters and press “Enter”.
The cursor will move to the next space. Once all (8) characters are
entered, the screen will read “Custom File Name Successfully Set”, then
the screen goes back to the
Return to Main Menu - + Enter
screen.
Press “Enter” to return to the main screen.
b.
Format SD Card
- Erasing data on the SD card can be done while
the data recorder is mounted inside the trailer enclosure. This
feature is used to delete any existing files on the SD card. Press the
Enter button to use this feature. The display will read “Insert card
(– to cancel)”. To erase the card, insert the card into the memory slot
located on the right side of the data recorder. When it’s finished, the
display will read “Format Done, Remove Card”. The SD card must now
be removed to return to the menu features.
c. The
Radar Type
and
Radar Speed should only be changed if directed by an authorized
technician.
d.
Error Messages
ERR! Card Lost (Press any Key)
If the SD card is removed without stepping through the saving data section, this error will appear. Go
back to “
Quick Start Guide - Data Recording Unit”
to record new data.
Note:
Data is written to the card as vehicles are recorded. The data can be recovered if the card is
not cleared.
Write Error/Card Error! Try another SD or Format Card.
If the SD card is bad or full, this message will appear. If the card is bad, try re-formatting it in the data
recorder side slot or your personal computer (if equipped to do so, see NOTE under “formatting card,
as listed above). If this does not remove the error, the card is likely bad and needs to be replaced.
File Name Max Reached, Clear SD Card or Set Custom Name
If you have tried to use the same file name 10 times, this error will display. To resolve the error, you can
do any or all of the following:
Create a new file name and clear the file name (so the date will be used)
Format the SD card, erasing the older files
Figure 4
- Settings Menu
Figure 5
- Settings Menu
© 2023 Adaptive Micro Systems LLC
© 2023 Adaptive Micro Systems LLC || 7840 North 86th Street | Milwaukee, WI 53224 | Phone (800) 558-7022 | AdaptiveDisplays.com
7840 North 86th Street | Milwaukee, WI 53224 | Phone (800) 558-7022 | AdaptiveDisplays.com
(800) 558-7022
(800) 558-7022
AdaptiveDisplays.com
AdaptiveDisplays.com
10
40
-F
18
1
1/
10
/2
3