07/08
How to Use
1.Charging
1) Connect the charging port with any USB charging
adapter or active computer USB port.
2) Charging will start automatically with the LED indicator
turning red.
3) The headphones are fully charged when the LED indicator
turns off.
2.Pairing
1) Make sure the headphones and your Bluetooth
®
device
are next to each other (within 3 feet / 1 meter).
2) Slide the Power Button to the Bluetooth
®
icon and hold for
3 seconds to bring the headphones into pairing mode
with the LED indicator flashing blue and red.
3) Activate the Bluetooth
®
function on your phone and
search for nearby Bluetooth
®
connections:
• For iOS: Settings > Bluetooth
®
> On
• For Android: Settings > Bluetooth
®
: On > Scan for devices
4) Find “TaoTronics TT-BH17” in the search results. Tap on the
name to connect. Once connected, the blue LED will flash
twice every 5 seconds.
Note:
• If a PIN code is required for pairing, try “0000” (four zeroes).
• The Bluetooth
®
headphones can remember previously
paired devices. If you have previously paired the
headphones with a device, simply turn on your device
and the headphones, they will connect to the last
connected device automatically without going into
pairing mode.
3.Pairing with two devices at the same time
Although you can pair with two devices, only one of them
can play music or make phone calls with the headphones
at any time. To pair with two devices:
1) Follow the previous instructions in the “Pairing” section to
pair the TT-BH17 with your first device.
2) Turn off the Bluetooth
®
function of your first device and
follow the “Pairing” instructions again to pair and connect
to your second device.
3) With the Bluetooth
®
function on both devices turned on,
switch between the two paired devices by pausing the
music on the first device and playing music on the
second device.
