05
06
Power On (Fig. 7)
Uncover the lid and they will power on automatically.
Power Off (Fig. 8)
Put the earbuds into the charging case and close the lid, they will turn off
automatically.
Pairing
• You can use one earbud or both earbuds as per your preference. Please
refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the device
to be connected close to the earbuds.
• When the earbuds are disconnected from your device for more than 10
minutes, they will turn off automatically.
Couple Earbuds Mode
1. Uncover the lid to turn on the earbuds, they will connect with each other
automatically. The LED indicators on both earbuds will flash blue and white
alternately indicating the earbuds are in pairing mode now.
2. Turn on the Bluetooth function on your device and search for nearby
devices. Find “TAOTRONICS SoundLiberty 92” in the searching results, tap
on the name to connect.
3. Once connected, the LED indicators on both earbuds will flash blue slowly.
Note:
• The earbuds can remember the devices paired previously, and will attempt
to pair with the last connected device. If re-pairing failed, the earbuds will
enter pairing mode.
• It is not recommended to wear the two earbuds on different people. If
necessary, please keep the two earbuds close to each other in couple
earbuds mode.
7
L
R
8
Single Earbud Mode
1. Take out one earbud from the charging case, and make sure the other one
is placed in the charging case and the lid is covered.
2. It will try to pair with the last paired device first then enter pairing mode
with its LED indicator flashing blue and white alternately if pairing failed.
3. Turn on the Bluetooth function on your device and search for nearby
devices. Find “TAOTRONICS SoundLiberty 92” in the searching results, tap
on the name to connect.
4. Once connected, the LED indicator will flash blue slowly.
Note:
If you want to change to couple mode, simply take out the other earbud
from the charging case, they will pair with each other automatically.
Clear Pairing List
If you failed to pair your device with the earbuds, please clear the pairing
history as instructed below:
1. Put the earbuds back into the charging case, close the lid then open it.
2. Press and hold the
Reset Button
for 10 seconds until the LED indicators on
the earbuds and the charging case flash white three times.
3. If you have paired your device with the earbuds before, remove
"TAOTRONICS SoundLiberty 92" from the Bluetooth device list and
pair again.
4. Re-pair with your Bluetooth® device as instructed in “
Pairing
” section.
Note:
If you want to pair the earbuds with another device when you have already
paired them with a device, deactivate the Bluetooth function on the paired
device or clear “TAOTRONICS SoundLiberty 92” from its Bluetooth list.
Restore the earbuds to factory settings as instructed above if pairing failed.
L
R
