07
08
Pairing
• You can use one earbud or both earbuds as per your preference. Please
refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the device
to be connected close to the earbuds.
Couple Earbuds Mode
1. Uncover the lid to turn on the earbuds, they will connect with each other
automatically. Once connected, The LED indicators on both earbuds will
flash blue and white alternately indicating the earbuds are in pairing mode
now.
2. Turn on the Bluetooth function on your device and search for nearby
devices. Find “TAOTRONICS SoundLiberty 53”in the searching results, tap
on the name to connect.
3. Once connected, the LED indicators on both earbuds will flash blue slowly.
Note:
• The earbuds can remember the devices paired previously, and will attempt
to pair with the last connected device. If re-pairing failed, the earbuds will
enter pairing mode.
• It is not recommended to wear the two earbuds on different people. If
necessary, please keep the two earbuds close to each other in couple
earbuds mode.
Single Earbud Mode
1. Take out one earbud from the charging case, and make sure the other one
is placed in the charging case and the lid is covered.
2. It will try to pair with the last paired device first then enter pairing mode
with its LED indicator flashing blue and white alternately if pairing failed.
3. Turn on the Bluetooth function on your device and search for nearby
devices. Find “TAOTRONICS SoundLiberty 53”in the searching results, tap
on the name to connect.
4. Once connected, the LED indicator will flash blue slowly.
Note:
If you want to change to couple mode, simply take out the other earbud from
the charging case, they will pair with each other automatically.
Clear Pairing List
If you failed to pair your device with the earbuds, please clear the pairing
history as instructed below:
1. Place both earbuds in the charging case.
2. Press and hold the Multifunction Touch Control of both earbuds for 10
seconds until the LED indicators on both earbuds flash white three times.
3. If you have paired your device with the earbuds before, remove
"TAOTRONICS SoundLiberty 53" from the Bluetooth device list and pair
again.
4. Re-pair with your Bluetooth® device as instructed in "Pairing" section.
Note:
If you want to pair the earbuds with another device when you have already
paired them with a device, deactivate the Bluetooth function on the paired
device or clear “TAOTRONICS SoundLiberty 53” from its Bluetooth list.
Restore the earbuds to factory settings as instructed above if pairing failed.
OPERATION AND FUNCTIONS
Function
Play / Pause
Operation
Tap the Touch Control on
either of the earbuds twice
Tap the Touch Control on the
right earbud
Tap the Touch Control on the
left earbud
Tap the Touch Control on the
right earbud three times
Tap the Touch Control on
either of the earbuds once
Tap the Touch Control on the
left earbud three times
Tap and hold the Touch
Control on either of the
earbuds for 2 seconds
Tap and hold the Touch Control on
either of the earbuds for 2 seconds
Volume -
Next Track
Previous Track
Answer Phone
Call
Decline an
Incoming Call
Turn On / Off
Voice Control
Hang up
Phone Call
When paired successfully,
tap and hold the Touch
Control on either of the
earbuds for 2 seconds until a
beep is heard.
Voice Prompt
/
Toots when highest setting
is reached
/
/
/
/
/
Call rejected
Toot
