34
Using Tao xm2go in Your Vehicle
1. Clean the mounting surface with the enclosed
surface preparation kit. Allow to air-dry.
2. Clean the same surface with the alcohol prep pad.
Allow to air-dry.
3. You may warm the adhesive pad using a hair dryer
or the vehicle’s defroster. Place the swivel mount
accurately since it will bond on the first try.
4. For best results, do not touch or apply any pressure
to the vehicle mount for 72 hours.
To remove the swivel mount, first try lifting the
adhesive pad with your fingers or a spoon. You may
warm it with a hair dryer for 2-3 minutes to help
soften the adhesive. Remove any leftover adhesive
from the dash surface by rubbing with your finger, or
you can use a mild cleaner as recommended by your
vehicle’s manufacturer.
Warning:
Tao xm2go should be placed in your
vehicle where it will not interfere with the function of
safety features, e.g., deployment of airbags. Failure to
correctly place Tao xm2go may result in injury to you
or others if the unit becomes detached during an
accident and/or obstructs the deployment of an airbag.
