FCC Statement
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
-
-
-
-
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
FCC ID: 2ANVW-MA-3040
1936032
JOIN THE COMMUNITY
SIGN UP to receive
∙ Special Offers!
∙ Access to Events!
∙ Contests!
∙ News on new products launched
www.muveacoustics.com/community
CUSTOMER SERVICE
For any service or technical queries, please contact our
service team on the below email.
Email: [email protected]
Thank you for trusting MUVEACOUSTICS with delivering
you excellence in sound. We encourage you to connect
with us and become a part of our community!
SCAN THE QR CODE YOU WILL FIND INSIDE. SHARE
WITH US YOUR PRODUCT EXPERIENCE.
Keep all relevant information for future reference
Imported and distributed by
Zeeva Electronics Private Limited.
All rights reserved.
901-902, Trade World C wing
Kamla Mill Compound,
Senapati Bapat Marg,
Lower Parel West,
Mumbai-400013
USER MANUAL AND WARRANTY
MA-3040
MUVEACOUSTICS ONE-YEAR LIMITED WARRANTY
MUVEACOUSTICS TAO earbuds have been subjected to a
thorough series of tests to ensure the highest level of
dependability. It is unlikely that you will experience any problem,
but if a defect should become apparent during the use of this
product, MUVEACOUSTICS warrants to the original purchaser
that this product will be free from defects in material and
workmanship for a period of 12 months from the date of your
original purchase from an authorized dealer. If a defect covered
by this warranty occurs, MUVEACOUSTICS, at its option, will
repair or replace the product purchase at no repair charge
(postage charges will apply). If a replacement is necessary and
your product is no longer available, a comparable product may
be substituted at the sole discretion of MUVEACOUSTICS.
This warranty does not cover normal wear and tear, abusive use
or misuse, modification, tampering or by any other cause not
related to either materials or workmanship. This warranty does
not apply to product used for any industrial, professional or
commercial purposes.
Bluetooth Connection
Warning And Cautions for the charging case and earbuds:
This product has Bluetooth wireless technology. It is
compatible with Bluetooth wireless equipped computers,
smartphones and MP3 players.
To use Bluetooth for you audio connection pair TAO with your
audio source (music player, smartphone, laptop or other
Bluetooth equipped device that can act as audio source). First of
all, take out the TAO earbuds from the charging case for power
on and go to pairing mode. Then the Bluetooth feature is
enabled on your mobile device in order to search for available
devices. In a few moments ‘MUVEACOUSTICS:TAO’ will appear
on your list of possible Bluetooth connections. Press ‘pair’ or
‘connect’ on your device and when the connection is made, you
can hear “your device is connected”.
The period of Bluetooth pairing is about 90 seconds. If there is no
pairing, TAO will shut off automatically after 10 minutes.
From now on, when you turn on TAO, it will automatically search
for the last Bluetooth device it was paired with.
To pair with another device, you should shut off both earbuds
and disable the Bluetooth connection of your device. Then turn
on the earbuds and repeat pairing procedure for another device.
Do not fully submerge in water. The earbuds are IPX5 water
resistance only.
Keep the earbuds and charging box clean and dry for
storage and charging. Avoid dusty, damp, and dirty
environments. Using the device in these environments may
damage the circuitry.
Do not use the device during thunderstorms to avoid any
lightning-related damage or injury.
Only charge or use the device at ambient temperatures
between 0 deg °C/ 32 deg °F and 45 deg °C/ 113 deg °F.
Keep the device away from excessive heat sources and direct
sunlight. Do not throw it into fire or in heating devices, such as
microwave ovens, stoves or radiators. The device may even
explode in extreme overheating circumstances.
Do not store device in enclosed vehicle.
Do not attempt to disassemble or remanufacture the device,
insert foreign objects into it, or immerse or expose it to water
or other liquids. Doing so may lead to fire, explosion or
other hazards.
Do not attempt to burn the device as it may explode.
Dispose of the device in accordance with local regulations.
Do not dispose of the device in normal household waste.
Improper device disposal is dangerous and could cause an
explosion. Please respect local laws on the disposal of
electronic products and their accessories and support
recycling efforts.
Keep the device out of reach of children and pets to prevent
them from accidentally swallowing and choking on the small
parts of the device. Biting or swallowing the device could lead
to serious injury.
Do NOT allow small children to use the earbuds.
Do not drop, squeeze, or pierce the device. If excessive
pressure is applied to the device, the device may short-circuit
or overheat.
When the device is being charged, make sure the power
source is close to the device and easy to reach.
When the device is fully charged, disconnect the charger
from the device and unplug the charger from the power
outlet. Do not leave charging overnight.
Do not use the charging case in excess of its output rating.
Use caution and follow applicable laws regarding mobile
phone and headphones use if using the earbuds for phone
calls while driving. Some jurisdictions impose specific
limitations, such as single ear piece configuration, on the use
of such products while driving. DON’T use the earbuds for any
other purpose while driving.
Do not use a charging case that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury to persons.
Do NOT use the earbuds at a high volume for any
extended period.
To avoid hearing damage, use your earbuds at a comfortable,
moderate volume level.
Turn the volume down on your device before placing the
earbuds in/on your ears, then turn the volume up gradually
until you reach a comfortable listening level.
Please note that we won’t take any responsibility for any
wrong operation (eg. Voltage higher than 5V) as this may
result in severe injury or loss of property and we cannot
control the operating process during the time the user using
this product.
In extreme cases, abuse or misuse of Lithium battery pack
can lead to explosion, heat generation, fire development or
smoke development.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
-
-
19.
20.
