Tao Motor BULL 200s Скачать руководство пользователя страница 65

Страница: 65 / 79

CHECKING WHEEL HUB BEARINGS

Wheel hub bearings must me checked at the intervals as shown in the periodic maintenance chart.

With the ATV placed on a level surface, move the top of the tire forward and backwards towards the

ATV to feel any play in the hub bearings. If bearing play is present or the wheel is not turning

smoothly contact your local Tao Motor dealer.

DIRECTIONAL TIRES

The

Bull

200

is equipped with directional tires, directional tread pattern is designed

to roll only in one direction. Lateral grooves on both sides of the tire point toward

the center, creating a "

" shape. The "

" shape must be pointing forward on each tire.

NOTICE

When installing tires on your ATV correct tread direction

is critical safety and driving performance.

Directional tires can only be rotated front to back.

(See directional indicator as an arrow on outside of tire.)

TIP

Содержание BULL 200s
















































































Результаты поиска

Содержание BULL 200s

Отзывы:

Tao Motor BULL 200s, Руководство пользователя, Страница: 65 / 79

Результаты поиска

Содержание BULL 200s

Отзывы: