Tao Motor BULL 200s Скачать руководство пользователя страница 22

Страница: 22 / 79

BATTERY CHARGING

Before charging the battery, set ignition key to the" OFF" position.

Remove seat.

Attach battery charger clamps to battery terminals.

Connect low-voltage battery charger to AC outlet. Use GFI AC Type outlet if possible for

additional electrical safety.

Check charging level and if charging is complete every 4 to 8 hours to prevent dangerous

overcharging of battery.

When charging complete unplug battery charger from wall outlet.

Disconnect battery charger cables from battery terminals.

Reinstall seat.

Always use a fuse of the specified rating. Never use any substitute fuses or larger amp fuses than the

original rated fuels. Any improper fuse or substitute fuse can cause electrical damage or fire and will

invalidate your vehicle's warranty.

Main Fuse Locatio

(under seat in front of

battery)

1. Main Fuse (10 Amp)

2. Fuse Holder

3. Spare Fuse

DO NOT charge battery with more than 2 Amp trickle charger.

DO NOT charge the battery any longer than 8 hours.

If you notice battery is swelling or bubbling, disconnect battery charger

immediately DO NOT continue to charge battery or attempt to

recharge.

DO NOT jump start this ATV by using a car battery or any other vehicles.

CHANGING FUSE

The fuse box is located behind the body on the rear left of the ATV.

1. Set ignition key to the "OFF" position.

2. Remove the blown fuse, check for any shorts or electrical issues and then

install a new fuse of same amperage as specified. And then install a new fuse

of the specified amperage.

3. Set ignition key to the "ON" position, to check if all the devices are

operating.

4. Reinstall seat.

If a fuse continues to blow, contact your local Tao Motor dealer to check for

electrical repair.

Содержание BULL 200s
















































































Результаты поиска

Содержание BULL 200s

Отзывы:

Похожие инструкции для BULL 200s

Бренды по названию

Популярные бренды

Tao Motor BULL 200s, Руководство пользователя

Результаты поиска

Содержание BULL 200s

Отзывы:

Похожие инструкции для BULL 200s

Бренды по названию

Популярные бренды