background image

• For ATVs not equipped with an odometer follow the month maintenance intervals.
• For ATVs equipped with an odometer or an hour meter, follow the km (mi) or hours maintenance intervals. 

However, keep in mind that if the ATV isn’t used for a long period of time, the month maintenance 
intervals should be followed.

• Items marked with an asterisk should be performed by a dealer as they require special tools, data and 

technical skills.

Off-road vehicles require regular maintenance.  The following items are critical to keep your 

Tao Motor

 

ATV 

performing correctly. 

PERIODIC MAINTENANCE CHART FOR THE EMISSION CONTROL SYSTEM

CHECK OR 

MAINTENANCE JOB

WHICHEVER COMES FIRST

INITIAL EVERY

Month

1

3

6

6

12

km (mi)

320 

(200)

1300 
(800)

2500 

(1600)

2500 

(1600)

5000 

(3200)

No.

ITEM

Hours

20

80

160

160

320

1

Fuel Filter*

• Check or replace if necessary.

2

Fuel Line*

•  Check fuel hoses for cracks or other damage, and replace if necessary.

3

Spark Plug

• Check condition and clean, regap, or replace if necessary.

4

Valves*

• Check valve clearance and adjust if necessary.

5

Crankcase 

Breather 

System*

• Check breather hose for cracks or other damage and replace 

if necessary.

6

Exhaust System*

• Check for leakage and replace gasket(s) if necessary.
•  Check for looseness and tighten all clamps and joints if necessary.

7

Spark Arrester

• Clean

CHECK OR

MAINTENANCE JOB

WHICHEVER COMES FIRST

INITIAL EVERY

Month

1

3

6

6

12

km (mi)

320 

(200)

1300 
(800)

2500 

(1600)

2500 

(1600)

5000 

(3200)

No.

ITEM

Hours

20

80

160

160

320

1

Air Filter Element

• Clean and replace if necessary.

Every 20-40 hours

(more often in wet or dusty areas)

2

Front Brake*

• Check operation and correct if necessary.
• Check fluid le el and ATV for fluid lea age, and correct if necessary.

3

3

3

3

3

• Replace brake pads.

Whenever worn to the limit

3

Rear Brake*

• Check operation and correct if necessary.
• Check brake pedal free play and adjust if necessary.
• Check fluid le el and ATV for fluid lea age, and correct if necessary.

3

3

3

3

3

• Replace brake pads.

Whenever worn to the limit

4

Brake Hoses*

• Check for cracks or other damage, and replace if necessary.

3

3

3

3

• Replace.

Every 2 years

5

Rear Brake Hose 

Protectors*

• Check for wear, cracks or other damage, and replace if necessary.

3

3

3

3

3

6

Wheels*

• Check runout for damage. Replace if necessary.

3

3

3

3

7

Tires*

• Check tread for depth and for damage, and replace if necessary.
• Check air pressure and balance, and correct if necessary.

3

3

3

3

41

Содержание Boulder B1






































































Отзывы: