Tao Motor Boulder B1, Руководство пользователя

Страница: 45 / 69

STEERING YOUR ATV
To achieve maximum traction while r iding off road, the two rear wheels turn together at the same speed. Therefore,
unless the wheel on the inside of the turn is allowed to slip or lose some traction, the ATV will resist turning. A special
turning technique must be used to allow the ATV to make turns quickly and easily.
It is essential that this skill be learned first
a t low speed.
As you approach a curve, slow down and begin to turn the handlebars in the desired direction. As you do so, put your
weight on the foot board to the outside of the turn (opposite your desired direction and lean your upper body into the
turn. Use the throttle to maintain an even speed through the turn. This maneuver will let the wheel on the inside of the
turn slip slightly, allowing the ATV to make the turn properly
This procedure should be practiced at slow speed many times in a large off- r oad area with no obstacles. If an incorrect
technique is used, your ATV may continue to go straight. If the ATV doesn’t turn, come to a stop and then practice the
procedure again. If the riding surface is slippery or loose, it may help to position more of your weight over the front
wheels by moving forward on the seat.
Once you have learned this technique, you should be able to perform it at higher speeds or in tighter curves.
Improper riding procedures such as abrupt throttle changes, excessive braking, incorrect body movements, or too
much speed for the sharpness of the turn may cause the ATV to tip. If the ATV be gins to tip over to the outside while
negotiating a turn, lean more to the inside. It may also be necessary to gradually let off on the
throttle and steer to the
outside of the turn to avoid tipping over.
36