4
32
Camera Setup Instruction
Enable Schedule Recording: tick to enable schedule recording
Continuous recording: the device will keep recording all the time.
Start recording when network fails: when network failed, the
recording will start automatically.
Schedule recording: press “Schedule” to enter schedule
programming.
Enable trigger recording: tick to enable trigger recording
Pre recording: define the recording time before alarm triggered.
Post recording: define the time the recording will last after the
alarm is disabled.
Triggered alarm ID: tick the alarm in No.
Motion detection channel: tick the motion detection channel.
Enable audio recording: tick to enable audio recording.
Streaming ID: select streaming 1 or 2.
Save Mode: select the save mode.
Keep days: define the recording keep days.
Record path
Local path: allow the user to define video recording and snapshot saving
path in .
Record
Record Path
Local Path
Snapshot
Path
Snapshot Policy
Record
Record Path
Recording Dir
Modify
Refresh
Local Path
Snapshot
Path
Snapshot Policy
SD
Disk Name:
SD Card
1
Disk Type:
Yes
Enable Flag:
0
Total Capacity:
Not Exist
Status:
unknow
Fle System:
Modify Direction
Set
Close
Name:
Free Space:
Enable Dir
File System:
ext3
0
SD1
Fromat
-SD card record
-SD card record modify direction
-FTP record
Recording Dir
Modify
Refresh
admin(admin)@ftp://192.168.3.2
Disk Name:
FTP
Disk Type:
Yes
Enable Flag:
0
Total Capacity:
Not Exist
Status:
unknow
Fle System:
