R i s k o f F i r e
Keep combustible materials such as furniture, papers, clothes and curtains at least 1.8m (6 feet) from the front of the
heater and away from the sides and rear. If the heater is to be used outside (under an appropriate canopy), we
recommend that an indoor socket is used.
I n t r o d u c t i o n
The Carnival heater produces radiant heat like the sun, warming people and objects and not the air in between, providing the only form
of heat that will not blow out or away. The Carnival heater is primarily designed for indoor use but can be used outside providing it is
situated under an appropriate canopy.
Please read the enclosed instructions carefully before use. The safety of this heater is guaranteed only by the correct usage
in accordance with these instructions, therefore it is recommended that they are retained for future reference.
S p e c i f i c a t i o n
T a b l e 1 . U K a n d E u r o p e a n H e a t e r s
Use MCB Type 3.
Voltage
Total
Current Min height Min distance
Min distance
Dimensions
Weight
Mounting
Model
(V)
Power
(A)
from floor
from ceiling
from side wall
W x H x D
(kg)
Orientation
(W)
(m)
(m)
(m)
(mm)
CARN4 1X1000H
230
1000
4.3
2.0
0.3
1.0
392 x 100 x 113
2.4
Horizontal Only
CARN4 1X1000U
230
1000
4.3
2.0
0.3
1.0
392 x 100 x 113
2.4
Horizontal or Angled
CARN4 1X1300H
230
1300
5.7
2.0
0.3
1.0
392 x 100 x 113
2.4
Horizontal Only
CARN4 1X1300U
230
1300
5.7
2.0
0.3
1.0
392 x 100 x 113
2.4
Horizontal or Angled
2
C a u t i o n
Before using this appliance:
- Check that the voltage indicated on the type plate corresponds to the mains supply voltage.
- Ensure that the heater has been securely fastened in its final mounting position.
Do not locate the heater immediately below a socket outlet.
Remove the plug from the mains socket during installation, cleaning and/or replacing the lamp. Always ensure that the
lamp is cool.
Do not handle the halogen lamp with bare hands. If it is inadvertently touched, remove finger marks with a lint-
free soft cloth and methylated spirit or alcohol. Otherwise, the finger marks will burn into the quartz glass of the
lamp causing premature heater failure.
Do not use an extension lead with this product.
Keep the mains cable away from the body of the heater which will get hot during use.
Do not cover or obstruct the heater while it is in use.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not
play with the appliance
.
Do not insert any object through any slot or opening in the heater.
Do not use if guard is not present.
Do not install less than the minimum mounting distance from the floor.
Do not touch the heater when it is switched on, as the body gets hot.
Do not use the heater in a damp area, for example a bathroom or near to a swimming pool.
Warning - this product must be earthed.
F o l l o w i n g i n f o r m a t i o n i s o n l y f o r E U - m e m b e r s t a t e s :
The use of this symbol indicates that this product may not be treated as household waste. By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please contact your local council, your household
waste disposal service or the shop where you purchased the product.
7
12. Refit the new lamp in reverse order ensuring that no wires get trapped and all screws are fully tightened.
11. The heater should now be broken down as shown in Fig. 11. Note that one of the lamp wires is shorter than the other. Ensure
your new lamp wires are the same length and its fitted the same way around as the original.
Fig. 11
