Tannoy VLS SERIES Скачать руководство пользователя страница 2

Important Safety Instructions

2    

VLS Series Operation Manual  rev 1.0.0

Important Safety Instructions

1.   Read these instructions.
2.  Keep these instructions
3.   Heed all warnings.
4.   Follow all instructions.
5.   Clean only with a dry cloth.
6.   Do not block any ventilation openings. Install in accordance  
 

with the manufacturer’s instructions.

7.   Do not install near any heat sources such as radiators, heat 
 

registers, stoves, or other apparatus (including amplifiers that 

 

produce heat.

8.  Only use attachments/accessories specified by the  

 

 manufacturer.
9.   Use only with a cart, stand, tripod, bracket, or table specified  
 

by the manufacturer, or sold with the apparatus. When a cart is  

 

used, use caution when moving the cart/apparatus combination  

 

to avoid injury from tip-over.

10. Refer all servicing to qualified service personnel. Servicing is 
 

required when the apparatus has been damaged in 

 

anyway, does not operate normally, or has

 

been dropped.

The lightning flash with arrowhead symbol within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage " within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.

The lightning flash with arrowhead symbol within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage " within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.

SAFETY WARNING

Do not remove any covers, loosen any fixings 
or allow items to enter any aperture.

SAFETY WARNING

Objects filled with liquids should not be placed on this apparatus.

AVERTISSEMENT DE SECURITE

Ne retirez pas les couvercles, ne desserrez pas les fixations et ne 
laissez aucune pièce s’introduire dans les ouvertures.

AVERTISSEMENT DE SECURITE

Ne placez pas d’objets contenant du liquide à proximité de 
l’appareil.

Содержание VLS SERIES

















Отзывы: