11. Technical Specifications
Frequency Response (1) +/- 3dB
67Hz - 23kHz
55Hz - 25kHz (with Tx2/TDx2 controller)
-10dB
Point 57Hz (50Hz with Tx2/TDx2 controller)
Recommended Amplifier Power
(passive Full Range)
350 - 700 watt / 8 ohm
Power Handling(2)
Average(2) Programme Peak (10ms)
Passive Full Range
350 watt 700 watt 1400 watt
Biamp
(LF)
350 watt 700 watt 1400 watt
Biamp
(HF)
60 watt
120 watt 240 watt
Sensitivity
(1)
2.83 volt @ 1m
Passive Full range
99dB (anechoic)
102dB (half space)
Biamp
(LF)
99dB
(anechoic)
102dB
(half
space)
Biamp
(HF)
106dB
(anechoic)
Maximum SPL (3)
Average
Peak
@ 1m
Passive Full Range
124 dB
130 dB
Biamp
(LF)
124
dB
130
dB
Biamp
(HF)
124dB
130dB
Impedance
Nominal
8.0 ohm (passive fullrange & each driver biamp)
DI Averaged (PCQ)
10.35, 500 Hz - 16 kHz
@
1kHz
(ISO)
6.35
@
2kHz
(ISO)
10.82
@
4kHz
(ISO)
9.2
@
8kHz
(ISO)
13
@
16kHz
(ISO)
15.8
Q Averaged (PCQ)
14.6, 500 Hz - 16 kHz
@
1kHz
(ISO)
4.93
@
2kHz
(ISO)
12.08
@
4kHz
(ISO)
8.32
@
8kHz
(ISO)
19.95
@
16kHz
(ISO)
38
Distortion
0.1 Full Power
2nd Harmonic
3rd Harmonic
250
Hz
0.32%
0.89%
1000
Hz
1.58%
3.54%
10000
Hz
5.62%
0.19%
0.01 Full Power
2nd Harmonic
3rd Harmonic
250
Hz
0.11%
0.71%
1000
Hz
0.79%
2.53%
10000
Hz
1.94%
0.161%
Driver Complement
1 x 12” (300mm) PowerDual
Constant Directivity Dual Concentric
Type number 3190
Crossover Point
Passive 1.5kHz
2nd order high pass, 2
nd
order low pass
Product can be reconfigured for active / bi-amped operation
Active system parameters available in section 13 of manual
Enclosure
37.5 litre vented, Birch plywood
Finish
Textured black paint (optional in white)
Protective Grille
Foam covered, powder coated perforated steel
Connectors
2 x Speakon NL4MP IN/OUT
Configuration for biamp operation via the termination panel.
Fittings
Recessed rear mounted carrying handle,
Blanking plate allows installation of a 35mm pole-mounting socket,
8 x M10 bracket inserts allowing for landscape or portrait orientations,
8
x
M10
flying
inserts.
Dimensions 486mm(H) x 370mm(W) x 375mm(D)
19.13”(H) x 14.57”(W) x 15.15”(D)
Weight
22 Kg (48.4 lbs)
NOTES:
(1) Average over stated bandwidth. Measured at 1m on axis.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m in an anechoic chamber
All Tannoy V Series products can be used with the Tannoy TDX2 Digital Controller for optimum system performance and when
being used with various sub bass systems. Please visit our website at
www.tannoy.com
for further details
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods
will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.
