![background image](http://html.mh-extra.com/html/tannoy/i15/i15_user-manual_817884003.webp)
1. Introduction
The Tannoy i15 professional loudspeaker has been designed for a wide variety of
sound reinforcement applications requiring extended frequency response from a
compact system, capable of delivering high sound pressure levels with extremely low
distortion, resulting in outstanding clarity, definition and detail.
The i15 comprises one 15 inch Dual Concentric driver in which the low frequency
(LF) and high frequency (HF) sources are coincidentally aligned to a point source,
resulting in a smooth uniform frequency response over a wide area of coverage
either as a portable stand alone system or in a multi-cabinet array. The sophisticated
CAD designed waveguide combines 60 degree conical dispersion and excellent
acoustic impedance characteristics. As the system is a point source, clusters and
arrays have minimal lobing. These features are inherent and achieved without the
use of any electronic signal processing
Designed for fixed installations, the i15 is constructed from medium density
fibreboard (MDF), for a high level of acoustic damping. The structural integrity of the
enclosure is further enhanced by internal steel braces which double as the flying
points accepting M8 eyebolts, strategically placed to distribute the weight of the
enclosure evenly.
For applications requiring extended low frequency enhancement, a range of Tannoy
sub-bass systems are available and can be used in conjunction with the i15.
2.
Unpacking
Every Tannoy i15 is carefully inspected before packing. After unpacking your
loudspeaker, please inspect for any exterior physical damage, and save the carton
and any relevant packaging materials in case the loudspeaker again requires packing
and shipping. In the event that damage has been sustained in transit notify your
dealer immediately.
3.
Connectors/Cabling
The i15 is fitted with two 4-pole Speakon
connectors. Speakon has the following
advantages over EP and XLR type connectors: all terminations are solderless, this
makes life easier at the time of installation or when field servicing is required.
Contacts will accept 6 sq. mm wire with an outside diameter of up to 15mm and a
current rating of 30 Amps.
The pins of the Speakon sockets identified as input/output on the rear of the input
panel are paralleled within the enclosure.
Tannoy have adopted the following wiring standard for the i15 :-
Pin 1+ is Positive
Pin 1- is Negative
Содержание i15
Страница 1: ...i15 USER MANUAL ...
Страница 6: ...8 Dimensions ...
Страница 7: ...9 Rigging ...
Страница 8: ...10 Performance Data ...