Tannoy HTS, Руководство пользователя

Страница: 4 / 8

4 ASSEMBLING THE CENTRE & SATELLITE (HTS 101) WALL BRACKETS
Fit the wall brackets to the smaller satellite speakers if you wish to wall mount them, as follows:
• Locate the appropriate screws and lock washers in the accessory pack - 2 screws for each wall bracket.
• Locate the Allen key tool which you will use to tighten the hex socket head screws.
• Each wall mounting bracket has two halves and a long screw/ pin which holds the two halves together to act as the hinge.
One half is mounted on the speaker using 2 screws and the other half is mounted on the wall using suitable screws and
wall plugs. It is your responsibility to ensure that the wall and the screw fixing method are both strong enough to support
the weight of the satellite speakers. See the specification page for weights.
• Separate each bracket into two halves by removing the long hinge screw.
• Fit one half of the bracket with the large holes to the speakers using the screws and lock washers provided. The threaded
hinge pin hole in the bracket should face the terminals on the back of the speaker.Fit the other half of the bracket to the wall
using a suitable fixing method for the type of wall material- seek professional advice if unsure
• Fit one half of the bracket to the centre speaker with the threaded hinge pin hole in the bracket facing the top of the cabinet This
orientation will allow the hinge pins to be fitted from the underside of the cabinet when mounting to the wall. Fit the other half of the
bracket to the wall using a suitable fixing method for the type of wall material- seek professional advice if unsure
• Position the satellite or centre speaker (with half the wall bracket(s) fitted) against the other half of the wall bracket already fitted
to the wall. Line up the brackets so that the long screw pin can be inserted vertically from below the satellite or centre speaker and
screwed up lightly. The speakers will now swing in the horizontal plane for best aural and visual effect. Tighten the long screw/ pin
to finish.
• To remove the speakers from the wall to access the wiring terminals, remove the long screw/ pin whilst carefully
supporting the weight of the speaker.
• Alternatively, self adhesive feet are provided for shelf mounting.