Tannoy ellipse PC/IP, Руководство пользователя

Страница: 9 / 22

Bass Management section
<Factory pre-sets>
This part of the Ellipse PC-iP software allows the user to set the desired
Bass Management crossover frequency. There are seven factory set management
options that can be selected by checking the box beside the desired frequency.
For further adjustment flexibility you may choose to activate the advanced bass
management function by checking the <on> box. The seven preset Bass Management
settings shown can now no longer be selected.
The <Advanced> button can then be activated to take you into the
Advanced Bass Management section.
Advanced Bass Management
<Advanced>
To activate the advanced bass management and access the set-up window
(see fig.5) check the <On> box in the Bass Management section of the main screen,
then press the <Advanced> button.
Fig.5 . Advanced bass management window
<Satellite HP Filter>
This is an independent Hi pass filter for the Ellipse monitors.
This can be combined with both 4
th
order and/or 2
nd
order Low Pass
subwoofer filters.
One or both of the Subwoofer low pass filters can be activated. If both are activated
then you are effectively cascading both filters (6
th
order)
<LFE=Sub>
By checking this box the LFE filter is set equal to the Subwoofer filter thus avoiding
phase cancellation. When activated, the coefficients from the two sub filters will be
copied to the LFE filter.
The sub filter in the EQ section can still be activated on top of the
<LFE=Sub>
filter setting.
10