Tannoy Ellipse 10 iDP, Руководство пользователя

Страница: 37 / 56

37
iDP SOFT
™
(cont.)
Network
Accessing the Network Screen
Press the (((•))) icon in the Main screen to access the Network facilities. In this screen various global network settings are
handled.
Press <AutoDetect> to scan your COM ports. If an Ellipse iDP
™
System is connected to any port it will be recognized.
Note that the AutoDetect function will not executed until <OK> is pressed.
} <Port>
Manual select of Serial/COM port.
}
<Status>
Indicates the status when entering the Network screen.
}
<Clear Network> - Clear Setup for entire network
Select this reset procedure to clear all tasks and setup settings.
}
<Clear Settings> - Clear Monitor Settings
All global and local parameters in connected monitors are reset. Preset and network settings are not affected.
}
<Reset to Factory Settings> - Reset All Settings
A “factory” reset procedure that deletes all global and local parameter settings as well as preset and network settings.
<Upload Software to Monitors>
Software updates for the Ellipse iDP
™
Monitors comes as (.syx) files
There are various files for monitors and subs.
} Save the .syx - file to a location on your hard drive prior to the uploading the file.
} Press Upload Software to Monitors
} Follow the onscreen instructions