Tannoy DVS EN54, Быстрый старт

Страница: 6 / 10

10
DVS EN54 Quick Start Guide
11
3. Standard accessories
Cable Clamp Cover
Yoke Bracket (Supplied with fixings) Bracket Clamp Tool
4. Installation guidelines
1. Fix the yoke bracket to the
surface using a suitable
fixing method.
2. Feed the speaker cable through
the cable clamp cover then
connect the Euro-type plug
to the wires, observing the
correct polarity.
3. For connection to the
loudspeaker, use Pins 1 (+)
and 2 (-). Pins 3 (-) and 4 (+)
are in parallel for connection
to additional speakers in a
distributed line.
4. Offer the speaker up to the
bracket and attach using
the screw caps then tighten
using the bracket clamp
tool provided.
5. Connect the Euro-type plug
then replace the cable clamp
cover to ensure the speaker
is sealed.
6. The DVS 4T (EN54)/-WH
models are fitted with
30 W transformers.
The speaker is supplied
in low impedance mode.
never connect the speaker to a
70/100 volt amplifier while it is
set for low impedance.
7. The DVS 6T (EN54)/-WH
models are fitted with
60 W transformers.
The speaker is supplied
in low impedance mode.
never connect the speaker to a
70/100 volt amplifier while it is
set for low impedance.