Tannoy CMS60 TDC - 60, Руководство пользователя

Страница: 6 / 18

3. Installation Instructions
3.1 Hole Cut Out
The cutout size required is 305mm (12”)
3.2 Connections
The CMS60 TDC – 60 / CMS60 TDC - 8 is provided with a plugable European type
connector, which is located on the back of the speaker can, under the wiring cover as shown
in
Figure 3a below. This consists of a plug and socket. The plug can be removed from the
socket ( Figure 3b ) for wiring.
Figure 3a. Figure 3b.
The plug is wired to the amplifier such that the connections are as follows:
Pin 1 is Positive
Pin 2 is Negative
For additional speakers, pin 3 and 4 are in parallel with pins 1 and 2, where:
Pin 3 is Negative
Pin 4 is Positive
Before connecting the speaker, ensure the wiring cover and cable clamp on the back of the
can are open as shown in
Figure 3c
.
Connect the wired plug into the socket.
Figure 3c
+ - - +