Tannoy CMS60 TDC - 60, Руководство пользователя

Страница: 14 / 18

10. Technical Specifications
Frequency Response (1) +/-3 dB 50Hz - 20kHz
Sensitivity 1W @ 1m (3)
90dB (anechoic)
93dB (half space)
Maximum SPL THP 60 108dB(average)
114dB(peak)
Low Impedance 109dB(average)
115dB(peak)
Power Handling (2) Average 80 watt
Programme 160 watt
Impedance Nominal: 8ohms (on low impedance setting)
Dispersion
See Beamwidth Plot
Driver Complement 6.5” (165mm) full range Dual Concentric™
Crossover 2kHz
Connectors Removable locking connector with screw
input and output terminals.
Safety Features
Rear safety tie back ring located at rear top
of enclosure for attachment of a load bearing
safety bond.
Enclosure 12 litres, vented with removable steel back
can
Finish
White
Weight (each) 5.5kg (12.1 lbs)
Dimensions Baffle Diameter 334mm (13 ”)
Can Height
226mm (8 ”), 243mm (9 9/16”) incl. Tie
back ring
Cutout size 305mm (12”)
Accessories (Optional) C ring
Tile Bridge
Plaster (‘mud’) ring
Shipping Weight (Pair) 11.8kg (25.96 lbs)
Shipping Dimensions (Pair) 750mm x 330mm x 40mm
(29.53”) x (13”) x (15.75”)
NOTES: (1) Average over stated bandwidth. Measured at 1m on axis.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m in an anechoic chamber
A comprehensive range of measurements including off axis frequency response curves, octave & third
octave polar diagrams, beamwidth plots as well as Ease

data can be downloaded from
http://www.tannoy.com/
Tannoy operates a policy of continuous research and development. The introduction of new materials or
manufacturing methods will always equal or exceed the published specifications, which Tannoy
reserves the right to alter without prior notice. Please verify the latest specifications when dealing with
critical applications.