3.4 Speaker Assembly with C-ring
To spread the weight / pressure of the 4 tags
(dogs)
, an optional C-ring is available for the CMS60
ICT – 30 / CMS60 ICT - 4. To install the speaker in the ceiling, place the C-ring behind the
surface by separating opening of the C-ring and twisting it through the hole. Slide the speaker
assembly through the hole and tighten the tag
(dog)
screws, until a firm grip is achieved,
3.5 Speaker Assembly with Tile Bridge and C-ring
If the speaker requires additional support, an optional
t
ile
bridge is also available for use in
conjunction with the C-Ring. This is assembled as shown in
below. The Tile Bridge is
attached to the C-ring, and the tile bridge supports are placed either on the supporting
framework for the false ceiling or inside the framework, depending on the ceiling grid spacing.
Slide the speaker assembly through the hole and tighten the tag
(dog)
screws, until a firm grip is
achieved.
Figure k
