10. Technical Specifications
Frequency Response (1) +/-3 dB
60Hz - 20kHz
Sensitivity 1W @ 1m (3)
89dB (anechoic)
92dB (half space)
Maximum SPL
THP
30
104dB(average)
107dB(peak)
Low Impedance
107dB(average)
110dB(peak)
Power Handling (2)
Averag
e
60
watt
Programme
120
watt
Impedance
Nominal: 4ohms (on low impedance setting)
Dispersion
See
Beamwidth
Plot
Driver Complement
6.5” (165mm) full range ICT™ Point Source
Crossover
7kHz
inductively
coupled
Connectors
Removable locking connector with screw
input and output terminals.
Safety Features
Rear safety tie back ring located at rear top
of enclosure for attachment of a load bearing
safety bond.
Enclosure
12 litres, vented with removable steel back
can
Finish
Paintable white
Weight (each)
4.3kg
(9.46
lbs)
Dimensions Baffle Diameter
334mm (13
⅛
”)
Can Height
226mm
(8
⅞
”), 243mm (9 9/16”) incl. Tie
back ring
Cutout size
30
5mm
(
12
”)
Accessories (Optional)
C
ring
Tile
Bridge
Plaster
(‘mud’)
ring
Shipping Weight (Pair)
9.8kg
(21.56
lbs)
Shipping Dimensions (Pair)
750mm x 330mm x 40mm
(29.53”)
x
(13”)
x
(15.75”)
NOTES:
(1) Average over stated bandwidth. Measured at 1m on axis.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m in an anechoic chamber
A comprehensive range of measurements including off axis frequency response curves, octave & third
octave polar diagrams, beamwidth plots as well as Ease
data can be downloaded from
http://www.tannoy.com/
Tannoy operates a policy of continuous research and development. The introduction of new materials or
manufacturing methods will always equal or exceed the published specifications, which Tannoy
reserves the right to alter without prior notice.Please verify the latest specifications when dealing with
critical applications.
