www.tanningessentials.co
TOWER ASSEMBLY
STEP 8
Attach the hose to the Rapid spray unit by pulling the
connection back exposing the prongs and ensuring the
“U” groove is facing up. Line up the prongs to meet the
unit, push the connection in to cover the fitting and screw
in clockwise until firmly in place and sitting straight.
STEP 9
Connect the hose to the applicator by aligning the “D”
fitting with the flat edge towards the back. Push the fitting
into the applicator and screw clockwise until firm without
over tightening.
STEP 10
Place the applicator in the cup holder.
Turn each fan unit ON and tyrn the spray unit/base ON.
