4 – Thermal Chambers
• Used to keep the “blocks” warm.
• Has programmable
temperature control.
• Removable transfer trays.
3 – LED Light Control
• Press key, the LED light
will become brighter.
• Press key, the LED light
will become darker.
A – Left Arrow
B – Right Arrow
C – Auto/Manual
D – Small Cryo
Plate On/Off
E – Minus Key
F – Plus Key
G – Set Key
A
D
B
C
E
F
G
1 – Paraffin Tank
• Holds up to 6 liters of paraffin.
• Temperature can be adjusted
in a range from 0° to 85°C.
• The reservoir has overheat
protection in the event of a
temperature control failure.
LCD Display Screen
2 – Main Control Panel
• To light up screen, press
any key
(except CRYO)
.
• The screen will enter into
protection and power save mode
after 15 minutes of no contact.
5 – Paraffin Dispenser
• Has programmable
temperature control.
• Flow control is adjustable.
Tanner Scientific® TN1500 - Embedding Center 7
Image 5.2
7 – Paraffin Waste Trays
• Two removable trays are located
under the heated work areas to
collect the excess paraffin
drained from the surface.
• Empty and clean both trays daily.
6 – Small Cryo Plate
• Located directly in front of
the embedding area to ensure
consistent, low temperatures
during the filling of the molds.
• Set temperature allows cryo plate
to cool to maximum ability.
8 – Hot Plate
• Features a paraffin trimmer
on both the left and right side.
• Has programmable
temperature control.
9 – Forceps Holder
• Maintains independent temperature.
