Eng
7
3. Step on Function
The scale will turn on automatically when the user steps onto the platform.
Note:
•If the weight is less than 22lb/10kg, the “Step-On” function will not work.
•If person less than 22lb/10kg, press the
key manually to turn on the scale.
•If an item is placed on the scale while it is powered off, accurate measurement will not be possible and the Step on Function may not operate
properly.
d
d
4. Changing Measurement Units
This function is used to change the measurement units on the display.
e.g. When change the unit “kg” to “lb”.
Press the
key.
The measure shifts from “kg” to “lb” and the measurement units change.
Eng
6
(or
)
d
d
d
d
d
d
2. BMI Weighing
1) Turn on the power by pressing the
key.
2) After all the segments flash, [0.0lb/0.0kg] is displayed.
3) The person to be weighed should still in the middle of the platform.
4) The weight will be locked-in and displayed on the display. “
(Hold)” sign will appear in the upper
left corner of the display.
5) Press the
key (or
). The default height [5ft7.0in/170cm] will be displayed.
6) Set the height with the
key.
7) Once the height and weight have been established, press the
key.
The weight and BMI calculation will then be displayed.
When the scale is connecting to an external device, weight, height and BMI data will be exported
at this time.
8) The scale will automatically shut off in 30 seconds.
The setting of height for BMI is can be accomplished in any one of the following means by press-
ing the
key (or
).
•Before stepping on the scale.
•After pressing the
key.
•After weight measurement while the weight result remains on the display.
d
d
d
d
9. Operation
1. Standard Weighing Procedures
1) Turn on the power by pressing the
key.
2) After all the segments flash, [0.0lb/0.0kg] is displayed.
3) The person to be weighed should still in the middle of the platform.
4) The weight will be locked-in and displayed on the display. “
(Hold)” sign will appear in the upper
left corner of the display.
When the scale is connected to an external device, weight data will be exported at this time.
5) The scale will automatically shut off in 30 seconds.
Note:
•Do not press the ON key while standing on the scale, as accurate measurement will not be
possible.
