Device Adapter
PC Adapter
9V
Part Names & Accessories
Setting
RS-232C Port
(TANITA equipment)
USB Port
(PC)
Indicator Light
Button
(inside the hole)
Button
(inside the hole)
DC Jack for
AC Adapter
RS-232C
Connector
USB
Connector
Side
Back
Front
Back
Front
Note
□
Setup Guide (this guide)
1. Set up the device adapter on the body
composition analyzer and set up the PC adapter
on your computer. Connection starts once power
is supplied. The lamps blink green when
connection starts.
The adapters are paired as the factory default.
You must install the necessary driver onto your PC,
available download from https://www.tanita.eu
See the separate document for further information on
changing the power supply settings.
Note
When communication is disconnected, the adapter lamps
remain lit in red.
2. When connection is completed, the adapter
lamps remain lit in green.
3. Measure body composition. The measurement
results are sent to the PC when they are displayed
on the body composition analyzer. The lamps remain
lit in blue while measurement data is being sent.
Indicator Light
90.0 - 249.9cm
5 - 99
Male
Age
Height
Female
Athletic
Standard
1
2
3
9
4
5
6
0
7
8
CE
Enter
PT
Setting
Central
OP-102 DEVICE
OP-102 PC
