en
If the auto-recognition function discovers multiple possible candidates, the device
automatically switches to ID selection mode after body composition measurement.
(The device beeps)
Select your ID number using the and buttons, then press to confirm.
If you notice that your ID number is incorrect while you are viewing your results,
press for 3 seconds or more to switch to the ID selection mode and re-select
your ID.
The monitor and the control panel light up depending on the area being measured.
This is a useful indication of the progress of the current measurement.
17
・
If you turn off the power without re-selecting your ID number, those measurement results are saved to the incorrect ID number.
Note:
ID Selection Mode
Measurement In Progress
Ex: Measuring the right side of the body
・
The backlight color changes depending on the registered ID.
1.Blue
2.Pink
3.White
4.Sky Blue
Guest: Purple
