Tanita BC-G02, Руководство пользователя

Страница: 19 / 24

en
19
Guest mode allows you to program the monitor for one-time use without using a
personal data number.
Press the Down button to select "GUEST", then press the SET/M button.
Next, follow the steps below:
Set the age, gender (male/ female/ male athlete/ female athlete) and height.
Step onto the monitor after “0.0kg” (0.0lb, 0.0stlb) is displayed.
The readings are displayed for 40 seconds.
Note: The age range is from 5 to 99.
Who should use Athlete Mode?
Adults aged 18 years and over who either:
・
Train or exercise for 12 hours or more a week and have been doing so for at least six months.
・
Are body builders.
・
Are professional athletes who want to monitor their progress at home.
・
Have a lifetime history of fitness and who used to do more than 12 hours a week but do less now.
・
Do not step off until " " disappears.
Note: If the monitor mis-recognize your number, press the Down button while the
measurement results are displayed. Select your personal number using the
Up/Down buttons and the press the SET/M button to display your
measurements results.
Programming the Guest Mode
Follow these instructions if the monitor continues to mis-recognize your number.
1.When the power is off, press the Down button to start measuring.
Select your personal number using the Up/Down
buttons and
then press the SET/M button.
2.Step onto the monitor when “0.0kg” (0.0lb, 0.0stlb) appears in the display.
The monitor turns off automatically after displaying the measurement results.
Specifying the Personal Data Number for Measurement
Press the Weight-only button. After 2 to 3 seconds, “0.0kg” appears on the display and
the monitor beeps. When “0.0kg” appears on the display, step onto the monitor.
The body weight reading appears.
The display lights for about 20 seconds, after which the power turns off automatically.
Taking Weight Measurement Only