background image

5

Do not attempt to disassemble the monitor. Do not modify this equipment in any way.
Do not wash the monitor in water.
Do not submerge this monitor in water.

Doing so may damage the monitor or cause it to malfunction.

Keep away from water.

Doing so may damage the monitor or cause it to malfunction.

Do not use or store this monitor in the following locations.

·Locations that are exposed to direct sunlight, near to heaters, or exposed directly to air from air conditioning units, etc.

·Locations where there are severe temperature changes or a large amount of vibration.

·Locations with high levels of humidity or moisture.

Do not use boiling water, benzene, thinner, etc. to clean the monitor.

If the monitor becomes dirty, soak a soft cloth in water or neutral household detergent, wring it out thoroughly and wipe the monitor clean, then 

use a dry cloth to wipe the monitor dry.

Another person should assist persons with disabilities who may not be able to take a measurement alone.

Be sure to insert the batteries with the polarities (+, -) in the correct position. 

If the batteries are incorrectly inserted, battery fluid may leak and damage the floor. (If you do not intend to use this monitor for a long period of 

time, it is advisable to remove the batteries before storage.)

Do not step on the monitor when your body is wet (immediately after a shower or bath, etc.) 

Be sure to thoroughly dry your body and feet before using the monitor. Failure to do so may cause you to slip or fall, resulting in injury. Also, the 

monitor cannot take accurate measurements if your body or feet are wet.

Place the monitor on a hard, flat surface where there is minimal vibration to ensure safe and 
accurate measurement.

Do not use the monitor near other products such as microwave ovens that emit electromagnetic waves. 

Doing so may cause the monitor to malfunction, preventing accurate measurements.

Avoid excessive impact or vibration to the monitor.

Doing so may damage the monitor or cause it to malfunction,or may cause setting to be erased.

Required

Содержание BC-401





















Отзывы: