There are two ways of connecting to another iPhone.
“ ” and “ ” are displayed, indicating that a connection can be
made within the next two minutes. (“ ” flashes during communica-
tion.)
Connecting to an iPhone
Select "Input Data", then select "Steps".
8
TOP
After Changing the Battery
Connecting to Another iPhone
When instructed to by the app, press and hold the
“ ” button
of
the Activity Monitor for two seconds or more.
The display switches to the clock display when the connection is
complete.Tap "completed" in the app to save the data.
→
Tap "Completed" in the app to save the data.
・
Connect by the same method as “Connecting to an iPhone for the First Time” (see p.7).
・
Press and hold the “ ” button for five seconds or more in the Measurement Results screen (see p.13).
When “ ” is displayed, perform “Register a Device” in the app.
NOTE
・
If the connection fails, follow the steps on p.7 or p.8 again.
・
To cancel communication after “ ” is displayed, press and hold the “ ” button for two seconds or more.
To avoid data loss, communication cannot be canceled while data is being sent (while “ ” is flashing).
・
When a new iPhone is connected, data that has already been sent to the previous iPhone is not sent to the
new iPhone.
・
To connect to the previous iPhone again after connecting to another iPhone, perform “Register an Activity
Monitor” again from the app.
・
The communication range of the AM-160 is approximately 5m. The range varies according to environmental
factors such as interference from other communication devices or obstructions.
・
Refer to each app for instructions on how to use the apps.
“ ” Button
Befor
e Use
