Tangye P6100S, Оригинальное руководство пользователя

Страница: 14 / 27

Allspeeds Document - Tangye Hydralite Manual Page 14 of 27
Rev 1. Issue 1. Date: 01/07/2021
5.4 Raising the Jack
The jack has an in-built hydraulic pump, which is worked by
means of an operating lever, under the control of the
operator.
The ram should only be extended hydraulically; it should
never be pulled out by hand or used to carry the jack.
The permissible working load and the travel of the hydraulic
jack is marked on the equipment.
5.4.1 Warnings
Do Not overload the jack, especially when lowering loads.
Do Not under any circumstances go under a load when
hydraulic jacks solely support it. Should work under a load be
required, a screwed version of the jack (or other means of
support
– e.g. chocks) should be used in order to
mechanically lock the load – see Section 5.6.
Do Not extend the ram by any means other than by pumping
the jack.
Do Not attempt to exceed the rated load of the jack on the
head or toe/claw.