Tangent TNR-50, Инструкция по эксплуатации

Страница: 9 / 20

08
REMOTE CONTROL
Installation of batteries
Remove the cover as illustrated.
Position two batteries of the type
AAA/R03/UM4 in the battery
compartment. Make sure that the
orientation of the batteries is correct (see
drawing at bottom).
Replace the cover.
Do not mix new and old batteries and do not use different types of batteries.
If the remote control is not used for prolonged periods, remove the batteries from the remote control
to avoid corrosion.
Using the remote control
Direct the remote control at the sensor on the front
panel of the unit. When the remote control signal is
received, the unit reacts accordingly. The remote
control works within a range of 6 metres.
Sometimes the remote control does not work well in strong light. You may have to move the unit if it is a
problem.
Malfunction may occur if other remote controls are used near the unit.
Do not place any objects on the remote control, as the batteries may become flat if a key is depressed
constantly.
Make sure that there are no obstacles between remote control and unit.
Do not position the unit behind tinted glass as it may reduce the maximum range of the remote control.
Infrared-
Sensor
- MEMORY AUTOTUNE FM/AM ST/MONO RESET
TUNING
POWER
TNR-50 FM/AM TUNER
+
+
AUTO TUNE
+
TUNE PRESET
MEMO
FM AM ST/MO
RDS POWER
TNR-50