background image

IMPORTANT INFORMATION

Handling instructions

The top and back panel of the unit may become
warm after prolonged use. This is not due to a
defect.

Turn off the power when the unit is not used.

Protect the power cord

Follow the instructions below to prevent
abnormal operation, electrical shock, fire or
personal injury:
Hold the plug firmly when inserting it into the
socket.
Avoid heat-producing devices.
Do not place objects on the power cord.
Do not carry out service work on or change the
power cord.

Positioning

Do not place the unit in any of the fol. places:
In sunlight, close to heat-producing devices or in
an enclosed rack.
In places with high temperatures (40C or more)
or high relative humidity (90% or more).
In dirty places as some internal parts may be
damaged.

Do not put your fingers or any

other objects into the unit

Touching the internal parts is dangerous and
may cause injury or damage. Do not open the
cabinet.
Do not place any foreign matter in the unit.

Interference

Placing the unit near a television set, radio or
video player may cause poor picture and sound
quality. In that case, move the unit further away
from the television set, radio or video player.

Condensation

Condensation may occur in the following cases:

When the unit is moved directly from a cold to a
warm place.

When the unit is used in a room where the
radiator has just been switched on or a place
where the cold air from the air-conditioning
system is directed at the unit.

If the unit is used in the summer in a warm and
humid room just after it has been moved from an
air-conditioned room.

If there is steam or a high level of humidity in the
room.

In case of condensation, the unit will not work
properly. Turn off the unit. Unplug the unit and leave
it for 2-3 hours. The unit will then have adapted to
the environment and any condensation will have
disappeared.

06

Содержание TNR-50





















Отзывы: