Tangent Medix 1700SF, Руководство пользователя

Страница: 23 / 43

Medix 1700SF User’s manual 23
two typematic controls listed next. By default, this field is set to
Disabled.
Typematic Rate (Chars/Sec)
When the typematic rate is enabled, the system registers
repeated keystrokes speeds. Settings are from 6 to 30 characters
per second.
Typematic Delay (Msec)
When the typematic rate is enabled, this item allows you to set
the time interval for displaying the first and second characters. By
default, this item is set to 250msec.
Security Option
This field allows you to limit access to the System and Setup. The
default value is Setup. When you select System, the system
prompts for the User Password every time you boot up. When you
select Setup, the system always boots up and prompts for the
Supervisor Password only when the Setup utility is called up.
APIC Mode
APIC stands for Advanced Programmable Interrupt Controller.
The default setting is Enabled.
MPS Version Control for OS
This option specifies the MPS (Multiprocessor Specification)
version for your operating system. MPS version 1.4 added
extended configuration tables to improve support for multiple PCI
bus configurations and improve future expandability. The default
setting is 1.4.
OS Select for DRAM > 64MB
This option allows the system to access greater than 64MB of
DRAM memory when used with OS/2 that depends on certain
BIOS calls to access memory. The default setting is Non-OS/2.
Report No FDD For WIN 95
If you are using Windows 95/98 without a floppy disk drive, select
Enabled to release IRQ6. This is required to pass Windows
95/98's SCT test. You should also disable the Onboard FDC
Controller in the Integrated Peripherals screen when there's no