Tangent Scale Models
PS-2CD 4000 Kit Assembly Instructions
17
21.
Attach the Roof:
Glue the roof onto the car.
22.
Attach the Roofwalk:
Attach the Tangent-supplied etched metal roofwalk to the top of the
car. We recommend using Cyan-poxy for this application (available from
www.mrhobby.com
), while other modelers prefer thinned Barge Cement (used for gluing
shoe leather). Normal CA-type glue is not resistant to temperature changes. Note that side
extensions of the roofwalk need to be bent about 30 degrees where the side part protrudes
from the main body and angles to the roof. Also, prior to attaching the roofwalk, the
roofwalk end supports must be bent so that they fit into the new end holes in the body (the
new holes drilled in step #3).
23.
Attach grab irons to the Roofwalk:
Attach the supplied bent corner grabirons and small
eyebolts to the holes in the roofwalk. See photo from above step #22.
