General Instructions
Nozzle Installation:
1. Shut off water supply and drain
lines. Existing supply lines should be
roughed into wall or sink back-
splash. Use 1/2” IPS (Iron Pipe Size)
inlets (male for B-0580, female for
B-0585) supplied by others.
2. Loosen no.
10
on assembly.
Remove no.
4
assembly from no.
2
or
no.
3
.
wall or
back-splash
1
3
2
4
12
10
Model B-0585
3. Tighten no.
1
towards no.
2
as far as
it will go by hand.
4. Apply teflon tape to threads of inlet
pipe. Screw no.
2
(B-0580) into inlet
pipe as far as it will go, tighten with a
wrench.
5. Tighten no.
1
so that it is flush
against wall.
6. Replace no.
4
assembly into no.
2
(B-0580) or no.
3
(B-0585), tighten
no.10 firmly against no.
2
or no.
3
.
For swivel repair or replacement of
(o-ring) no.
6
and (sleeves) no.
7
:
1. Shut off water supply and drain
lines.
2. Loosen no.
10
on assembly. Remove
no.
4
assembly from no.
2
or no.
3
.
3. Insert one no.7 onto no.
8
. Install
no.
6
on no.
8
and
lubricate liberally
with
o-ring grease
. Install second
no.
7
onto no.
8
. (See Enlarged View)
8
7
6
Outlet Assembly:
For repair or replacement of parts:
1. Insert prongs of no.
17
through
hole in part no.
18
and flair outward,
as shown:
2. Slide no.
18
through no.
19
and
no.
19
through no.
20
.
3. Insert no.
21
into no.
20
and tighten
firmly and securely against no.
19
.
17
18
17
19
21
prongs
20
