50
51
Using a PC with MCR-4V
Download Recorded Data from all Connected MCR-4V
Units
1.
Connect the Master unit to your computer via USB.
2.
Get a data list for the Master. (see p.48)
3.
Click [Search for Slave] to get data lists for the connected Slave
units.
4.
Place a check next to the target data.
* It is possible to select data from both the Master and Slave unit(s) for
simultaneous download.
5.
Click [Download].
* If it takes too long to download data recorded from Slave units, it is also possible
to directly connect a Slave to the PC via USB and download individually. (You can
switch the USB cable from the Master to connect a Slave.)
IMPORTANT
Do not disconnect the USB cable during communication between a device and the
PC.
Analyzing Recorded Data
Open Recorded Data
In the storage folder for the downloaded recorded data on your PC
(p.48), double click on the desired recorded data file. “T&D Graph”
will be opened and a graph displayed.
Print Graphs
1.
Open recorded data from “T&D Graph”.
2.
Make any desired adjustments to the window size and aspect ratio
to be reflected in the printed graph.
3.
In the [File] menu, select [Print Graph] to view the preview image of
the printed page. If necessary, go back to step
2
and change the
aspect ratio again.
4.
To start printing, select [Print].
“T&D Graph” also enables you to:
-Insert memos, comments, and shapes on the graph
-
Merge and filter recorded data
-Copy graphs
-Display data as a list
-Export the graph as text data (in CSV format)
* Refer to Help in “T&D Graph” for details about operations and procedures.
