2 TC36.NG03
040705-8
REPOSITION MANIFOLD ON
MANIFOLD BRACKET
Fig. # 1
INSTALL MANIFOLD BRACKET
Fig. # 2
INSTALLING BURNER SHIELD
Fig. # 4
BLACK DIAMOND BURNER INSTALLATION
If the control is installed on the left hand side of the unit the
manifold will also need to be repositioned before the manifold
assembly is installed. This is done by removing two retaining
screws, turning the manifold over and re-attaching. See Fig.
#1. The pilot support bracket, installed on the burner tray,
will also have to be positioned on the left hand side of the
burner tray.
1) Attach the manifold bracket to the fl oor shield in the bottom
of the fi rebox with one screw as shown in Fig. # 2.
2) Panel clips must be installed on the bottom of both side
panels (notch facing inside), before installing the panels,
and positioned as shown in Fig. # 3 to insure proper
positioning of burner shield.
POSITIONING PANEL CLIPS
Fig. # 3
INSTALLING BURNER SHIELD SPRING NUTS
Fig. # 5
Содержание TC36.NG03
Страница 7: ...040705 8 TC36 NG03 7 NOTES...