Burnaby TIKI TORCHES Installation & Maintenance Instructions Download

Page: 1 / 4

Revised June 23/10

222 Woodland Drive, Vancouver, B.C. V5L 5C8 Ph: (604) 877-1599 Fax: (604) 875-6776

INSTALLATION & MAINTENANCE INSTRUCTIONS

TIKI TORCHES FOR PERMANENT MOUNT

FOR YOUR SAFETY

If you smell gas:

Shut off gas to the appliance

2. Open

windows

Don’t touch electrical switches

Extinguish any open flame.

Immediately call your gas supplier

NOTE: The installation of these Tiki Torches must conform with local codes or in the absence of local codes,
with National Fuel Code ANSI 223.1

_____________________________________________________________________________

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.

TIKI TORCH FOR PERMANENT MOUNT

(PROPANE)

Burner Screen:
Stainless Steel 3/32” RD x 5/32 cc
Perforated

Summary of Contents for TIKI TORCHES

Page 4: ...quired Using 54 drill bit for LP and 48 drill bit for NG clean the burner orifices if required 6 Re assemble it is recommended to replace the 1 x 1 16 buna o ring between the hex nuts Call or use the manufactures web site for a dealer nearest to you 7 Fire unit and observe the flame The flame should be a lazy yellow flame with some blue at the base and no visible smoke 4 ...