Voyager E5784 and E5788 HD DSNG Encoder
27
5.2
Multichannel DSNG Link
If the Encoder has a Remux card fitted it can produce an MCPC
(Multi Channel Per Carrier) output.
NOTE
IF Output contains 4 services: Service 1 + Service 2 + Service 3 +
Service 4.
Figure 5.1: Block Diagram – One Stage of Remultiplexing
To put the Encoder into a typical configuration for a MCPC DSNG link
>
Navigate to the
Config Menu
.
>
Select either Factory HD Defaults and Replace Configs.
>
Load Active Config – select the configuration which has the coding
standard and satellite bandwidth that is required.
VIDEO (ANALOGUE)
VIDEO (DIGITAL)
AUDIO
SYNC DATA
ASYNC DATA
Tx
Up-link equipment
(including
Up-converter and
High Power
Amplifier)
IF Output
Service 1
Service 2
VIDEO (ANALOGUE)
VIDEO (DIGITAL)
AUDIO
SYNC DATA
ASYNC DATA
Contributing
Encoders
ASI
ASI
ASI
Primary
(Master)
Service 3
VIDEO (ANALOGUE)
VIDEO (DIGITAL)
AUDIO
SYNC DATA
ASYNC DATA
Service 4
VIDEO (ANALOGUE)
VIDEO (DIGITAL)
AUDIO
SYNC DATA
ASYNC DATA
