Voyager E5784 and E5788 HD DSNG Encoder
12
Type of Connector
Description
Technical Earth
Connect the Encoder's Technical earth to a suitable
point.
IF Version
IF Out Main
A 75
W
BNC connector provides the main satellite
modulator IF output.
IF Out Mon
A 75
W
BNC connector provides the a satellite modulator
IF output. which is approximately –20dB relative to IF
Main.
L-Band Version
L-Band In
A 50
W
SMA connector provides the L-Band input, which
is summed with the modulator output.
L-Band Out (Main)
A 50
W
SMA connector provides the main satellite
modulator L-Band output. This output can also provide
+24V DC at up to 500 mA to power an up-converter.
Both models can also provide a 10 MHz reference
frequency output.
L-Band Out (Mon)
A 75
W
F-type connector provides the a satellite
modulator L-band output. which is approximately –30dB
relative to the main output.
NOTE
Refer to the Reference Guide for all power supply, fuse, safety, EMC
information and operating conditions.
2.6
Connecting the Encoder to the Power Supply
WARNINGS
1. Do not overload wall outlets and extension cords as this can
result in a risk of fire or electric shock.
2. As no mains switch is fitted to this unit, ensure the local power
supply is switched OFF before connecting the supply cord.
3. The Encoder is not fitted with an on/off switch. Ensure that the
socket-outlet is installed near the equipment so that it is easily
accessible. Failure to isolate the equipment properly may cause
a safety hazard.
