TANDBERG TT-1222, Справочное руководство

Страница: 108 / 132

Front Panel LCD Menus
Page C-20 Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2
C.5.16 CVBS Output Menu
Table C.24: CVBS Output Menu
Menu title: SET: CVBS OUTPUT Description Section
Alarm State: Selects the format of the CVBS output if an alarm is raised.
Sync - The CVBS output will not be affected by an alarm condition
and will continue to output a valid video signal (with sync pulse).
NoSync - The CVBS output will have no sync pulses.
Default = Sync ----
Delay State: Selects the number of seconds an alarm should be present, before
the CVBS output goes to NoSync.
NOTE…
This item only applies if the Alarm state is set to
NoSync.
Range = 0-999.
----
Hold State: Selects the number of seconds an alarm should be cleared, before
the CVBS output returns to a valid output.
NOTE…
This item only applies if the Alarm state is set to
NoSync.
Range = 0-99.
----
C.5.17 GPOs Menu
There are Five GPOs available on the receiver. Each one of these can be
configured to activate on one or more particular events or conditions.
Table C.25: GPO Setup Menu
Menu title: SET: GPOs Description Section
GPO 1 > Enters the GPO 1 Setup Menu. C.5.18
GPO 2 > Enters the GPO 2 Setup Menu. C.5.18
GPO 3 > Enters the GPO 3 Setup Menu. C.5.18
GPO 4 > Enters the GPO 4 Setup Menu. C.5.18
GPO 5 > Enters the GPO 5 Setup Menu. C.5.18