TANDBERG TIA 3012, Руководство по эксплуатации

Страница: 5 / 52

IMPORTANT! All connections should be carried
out before the power is switched on.
For connecting record player with
Moving Coil pickup.
For connecting record player with
Moving Magnet pickup.
CAUTION!
Do not use phono plugs
longer than 15 mm. At the bottom
of each phono socket is a switch
that can be damaged if the plug is
too long, see figure.
For connecting an FM/AM tuner.
For connecting a digital record
player or other audio equipment.
Tuner:
DD/Aux:
Tape
Reel
Tape Play: For connecting an open-reel tape
recorder or cassette recorder.
For connecting 4 loudspeakers.
CAUTION! Check the polarity of
the speakers.
The figures on pages 46 and 47 show examples of
connections,
signal paths and plug types.
NOTE! A protection circuit will cause a few
seconds delay.
Peak clipping indicators
The indicators (one for each channel) will
indicate when peak clipping of the signal occurs.
• Control the volume with the knob marked
Volume.
• Control the volume balance between the right
and left channels with the knob marked
Balance.
Headphones
• Connect stereo headphones to the socket
marked Headphones.
• Adjust the volume in the headphones with the
knob marked Volume.
The balance control, marked Balance, is common
to the headphones and loudspeakers.
0110
,,6kHz
o3KHz Loudrless