TANDBERG Remote Control, Руководство пользователя, Страница: 19 / 20

18
you will see a black screen the next time. Press the Presentation button to
turn Presentation off.

Make sure that the far end participants are also set to Main Camera.

Check to make sure the cables are properly connected between your
system and your camera

Press the Selfview button to test if your camera is working
Problem

The picture is out of focus, too bright, or too dark.
Solution

Press the ZOOM button on the remote control – this will trigger the auto
focus function

You can adjust settings for a too bright or too dark picture by going to Main
Menu—Camera Control—Picture Control. It is best to leave these set to
Auto Adjust.

Control the light in the room with curtains or overhead lights. Bright
window light will confuse the camera, so shut curtains if possible.
Problem

The system does not automatically activate when you pick up the remote
control
Solution

Make sure the screen and the codec are switched on and have electricity

Make sure all of the cables are properly connected from the codec to the
camera

Check the batteries in the remote control

Make sure the green light on the front of the camera is on
If you are still having technical difficulties, please contact your library system’s
IT department immediately.