TANDBERG MXP 770, Руководство пользователя

Страница: 78 / 79

70
8 Glossary
A
Alert speaker: The internal speaker will warn you of an incoming call even though the monitor
may not be switched on.
Audio call: Audio call equals a telephone call. You can make a call with the video system with
audio only.
C
Call status: Comprehensive information about the call listing transmitted and received
audio/video/data information.
Codec: The Codec is the heart of the system. The main task for the Codec is the compression of
outgoing video, audio and data, the transmission of this information to the far end, and
the decompression of the incoming information.
D
Dataport: The system provides a standard RS232 dataport to allow a computer to be connected
for data transfer and control purposes.
I
Incoming call: Someone calls into your system.
IP-address: Defines the network address of the system. This address is only used in static mode.
IP-assignment: IP-address, IP-subnet mask and Gateway are assigned by the DHCP server.
IP-assignment Static: The system's IP-address and IP-subnet mask must be specified in the IP-
address field.
IP-subnet mask: Defines the type of network. This address is only used in static mode.
L
Layout: Use the Layout key to change picture layout on the screen.
M
Main camera: Your camera. Video input 1
MicOff: Microphone is switched off.
N
NTSC: National Television System Committee. Video standard corresponding to 4SIF. Primary
used in USA, Japan and other countries.