EN5990 Encoder for MPEG-4 Part 10
5
1
Who Should Use This User Guide?
This User Guide is written for operators/users of the EN5990 Encoder to assist in
installation and operation. It is not intended to be a detailed source of information.
This can be found in the
Reference Guide
companion document, which is issued
on CD.
WARNING
Do not remove the covers of this equipment. Hazardous voltages are
present within this equipment and may be exposed if the covers are
removed. Only TANDBERG Television trained and approved service
engineers are permitted to service this equipment.
CAUTION
Unauthorised maintenance or the use of non-approved replacements
may affect the equipment specification and invalidate any warranties.
1.1
What Equipment is Covered by This User Guide?
Table 1.1: Equipment Model Descriptions
Model Number
Marketing Code
Description
EN5990 Encoder
EN5990/BAS
Premium 2RU Encoder supporting
H.264/AVC HD video encoding for low
bitrate applications.
EN5990 Encoder
(-48 Vdc version)
EN5990/BAS/48V EN5990/BAS
Encoder with -48 Vdc input
1.2
Hardware and Software Options
for a list of hardware options and
for a list of software
options available with the Encoder. Detailed information is in the
Reference Guide
.
Table 1.2: Hardware Options
Marketing Code
Description
EN5900/HWO/IPTS
IP Network Interface Card that enables transport stream
output over an IP/Ethernet network. Single 10/100BaseT
output. Has been superseded by the IPTSDUAL card.
EN5900/HWO/IPTSDUAL
Replacement for previous option card that has 2 separate
IP/Ethernet ports and can interface to GigE network.
