TANDBERG D14049.04, Руководство администратора

Страница: 135 / 296

135
D14049.07
March 2010
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Introduction
Overview and
status
System
configuration
VCS
configuration
Zones and
neighbors
Clustering and
peers
Call
processing
Bandwidth
control
Firewall
traversal
Appendices
Applications Maintenance
Configuring the VCS as a traversal client
Adding and configuring a traversal client zone
To enable your VCS to act as a traversal client on behalf of its endpoints and neighbor gatekeepers,
you must create a connection between it and a traversal server (e.g. a TANDBERG VCS Expressway
or Border Controller).
You do this by adding a new traversal client zone on the VCS client and configuring it with the details
of the traversal server.
To add a new traversal client zone:
•
VCS configuration > Zones .
You are taken to the Zones page.
Click New .
You are taken to the Create zone page.
• xCommand ZoneAdd
To edit an existing traversal client zone:
•
VCS configuration > Zones .
You are taken to the Zones page.
Click on the name of the zone you want to configure.
You are taken to the
Edit zone page.
•
xConfiguration Zones Zone [1..1000]
•
xConfiguration Zones Zone [1..1000] Traversal Client
For details on the configuration options available for traversal client zones, see the Configuring
traversal client zones section.
You can create more than one traversal client zone if you want to connect to multiple
traversal servers.